e-RTG vs diesel RTG: how to tell them apart in satellite imagery

A rubber-tired gantry crane straddling tall stacks of shipping containers in a container yard at dusk.

Container terminals are converting RTG blocks to electric power on a schedule that rarely makes a press release. A terminal operator swaps out diesel gensets for cable reel or conductor-rail power one block at a time, often spread across two or three budget years, and the only public record is whatever shows up on the next overhead pass. If you're tracking yard crane electrification across a market instead of one port, that pass is often the only record you get.

What actually changes on the machine

A diesel RTG carries its own power plant: a generator housing sitting on the sill beam, usually with a small exhaust stack or vent grille on the roofline, and a fuel tank bracket somewhere on the chassis. Convert that same crane to cable reel power and the genset housing comes off, the exhaust stack disappears, and a cable reel drum goes on one end of the machine, usually the end that faces the block's power trench. Conductor rail (busbar) conversions skip the reel drum entirely and instead add a continuous rail casing running the length of the block, mounted on brackets alongside the rail the crane rides on.

Hybrid RTGs split the difference: a smaller genset handles crane travel between blocks, while hoist and trolley motion draw off the cable reel within a block. From directly overhead, a hybrid can look a lot like a straight diesel unit unless the cable reel and trailing cable are visible at the block end.

Reading the tell from a satellite pass

At 0.5 m GSD you're not resolving a cable reel drum as an object with edges. You're reading the pattern it leaves behind. A converted block shows a continuous linear feature running parallel to the crane rail, a cable trough or conductor rail casing, that a diesel block doesn't have. It shows up as a thin, uniform strip with a slightly different tone than the paved yard surface around it, running the full length of the block rather than stopping partway.

The genset housing is the easier tell on the crane itself. It adds bulk and a slightly asymmetric roofline to one end of the machine, and in a good pass you can pick up a small shadow kick where the exhaust stack or vent sits proud of the deck. Cable reel conversions tend to have a cleaner, flatter roofline across the whole machine because there's no generator bay to house. That difference in silhouette is the single most reliable read at this resolution, more reliable than trying to spot the cable itself.

Shadow angle matters here more than usual. A low sun pass throws the genset housing's shadow out to the side of the crane body, which is often the clearest way to separate a diesel RTG from an electric one when the cranes are parked nose to nose in a block and you're scanning a whole row at once.

Comparing the same block year over year

Because electrification rolls out block by block, the useful read often isn't one image, it's two. Pull the same yard block from last year's pass and this year's, and a conversion shows up as a new linear feature along the rail plus a change in crane roofline across some or all of the units in that block. A terminal rarely converts its whole RTG fleet in one go, so expect mixed blocks: three electrified cranes parked next to two still running diesel, which is itself a useful data point if you're trying to size how far along a given terminal is.

This is the kind of detail that's easy to track for one terminal you visit and genuinely hard to hold across a market of thirty or forty of them, which is exactly the gap a terminal-by-terminal crane inventory is built to close: count, type, manufacturer attribution where it's visible, rough dimensions, and now an electrification note per RTG block, refreshed on an annual cadence instead of whenever someone happens to drive past.

If your market-intelligence build needs that RTG electrification status laid out terminal by terminal, that's the dataset Crane Fleet Mapping is built to produce.

Start a pilot

Back to the blog